Bathroom Caulking Tips

Moisten a paper towel with rubbing alcohol.

Bathroom caulking tips. We all know that splashes and drips make their way out of the tub or on the floor where people step out of the shower. A good caulking job starts with a clean surface. Things you ll need razor scraper or utility knife tweezers vacuum cleaner denatured alcohol bleach acrylic latex or silicone caulk painter s tape application gun scissors paper towel or lint free rag.

When you reach the end quickly lift the tip from the surface and release pressure. Cut old caulk out with a utility knife razor blade putty knife or scraper. Use your finger to tool the caulk by pushing the excess onto the tape.

This prep work helps to ensure a strong connection between the new caulk and the clean tile. Keep the gun moving as you let up and give the handle another squeeze. Scrub the grout and then rinse off the mold killer with water and let it dry.

Take the time to remove any existing caulk to help ensure a good seal. Use the alcohol to clean residue off the surface of the tiles along where you will need to re apply caulk. Apply either silicone or latex caulk with a caulk gun or squeeze the product straight from the tube.

Use masking tape around the seam you are caulking keeping the two pieces of tape at a distance the size of the desired bead. Treat any mold in the grout along the wall tub gap with a mold killing product. The straightforward process follows these steps.

Clean excess caulk from the tip before you start a new bead photo 2. Clean the bare tiles and grout once the old caulk is gone remove any loose grout between the walls and the tub or shower floor. Use a hair.